CAN-bus enabled alarm systems are a great way to upgrade your vehicle security plus add additional options to the factory standard keyless entry system.

CAN-bus security upgrade systems are vehicle specific. They are programmed with the necessary firmware to communicate directly with the OEM CAN-bus system, allowing it to monitor and interact with the electronic functions of the vehicle.

The 390 & 330X series CAN alarm systems are designed to enhance security in vehicles manufactured with OEM remote controlled central locking as standard.

There are three models available in each series to cover the hardware platforms for the three CAN-bus systems currently used by OEM manufacturers – fault tolerant, single wire & high speed.

Both alarm series provide door, boot and bonnet protection, a two stage shock sensor for light and heavy impacts and an engine immobiliser. However the 330X series benefits from two additional features - Ultrasonic sensors and a 120dB battery back up siren, giving the 330x series Thatcham category 2-1 approved status.

Both systems can be further enhanced by the addition of accessories such as remote controlled engine start, dual zone proximity sensing and tilt/motion sensing.

Click here for Vehicle Compatibility Chart

CAN1 CAN-bus interface module

Compatible with most VAG platform vehicles (Click here for compatibility list) The CAN 1 Interface module greatly reduces security system installation time with a simple 2 wire connection to the security system main harness and *ESP port. (*Viper security systems only)

It includes a universal loom and pre-wired adapter harness for the Viper 3K series systems, allowing straightforward plug-to-plug connection.

The interface module allows Bi-directional communication, monitoring the vehicles status and system functions, factory alarm arming/disarming, ignition status, door status, boot status, bonnet status and engine RPM.

Additionally -where features are available on vehicle- the module also controls door locking and unlocking, boot release, interior lights, electric window operation, sunroof, headlights, indicators, hazard lights, fuel door, radio and horn.

CAN-Bus Stalk Control Adaptors

With in-vehicle technology constantly evolving, the integration of CAN-Bus systems has made original manufacturer equipment much harder to replace or upgrade.

With this in mind, Autoleads have released a range of CAN-Bus stalk control adaptors to solve the problem. The new interfaces operate the same as their non CAN-Bus equivalents concerning controlling your stereo head unit from the steering wheel but additional features such as switched ignition live or a speed pulse for the integration of a navigation system are also available (PC910).

PC99 Range

This range consists of RESISTIVE, VAN-Bus and CAN-Bus steering wheel control adaptors and covers all major head unit manufacturers with the appropriate adaptors. Numerous leads within the PC99 CAN-Bus range will also give a switched live ignition supply* from the module *(PC99-X 80/81/85/90).

PC910 Range

The PC910 range consists of CAN-Bus interface adaptors with an ignition supply (switched live), an interior light trigger, a speed pulse for navigation systems, reverse gear for incorporating a camera, a telemute trigger for hands free kit integration and steering wheel control functionality.

PC911 Range

Currently consisting of two products, this range is dedicated to Renault vehicles with the “Update list” head unit. A full range of adaptors are available for most head unit makes.

The vehicle dash will display the make of the aftermarket head unit and will allow operation via steering wheel controls.